Инструкция Товара для GoVideo vr1940
22
DVD Recorder+VCR User’s Guide
Video Output
Activates the Component Video or
Progressive Scan output to your TV.
Progressive Scan output to your TV.
1
Press SETUP.
2
Select System > Video Output.
3
Choose from the following:
Component - Activates the Compo-
nent Video output.
Progressive - Activates the Progres-
sive Scan output.
Component - Activates the Compo-
nent Video output.
Progressive - Activates the Progres-
sive Scan output.
NOTE:
• Do NOT choose Progressive unless
• Do NOT choose Progressive unless
you have connected the DVD
Recorder+VCR to a TV equipped with
a 480p Progressive Scan input.
Recorder+VCR to a TV equipped with
a 480p Progressive Scan input.
• If you select Progressive accidentally,
press ENTER to cancel, or wait a few
seconds for the screen to revert to
normal. If there is still no picture, see
Troubleshooting on page 46.
seconds for the screen to revert to
normal. If there is still no picture, see
Troubleshooting on page 46.
Child Lock
Disables the front panel buttons.
1
Press SETUP.
2
Select System > Child Lock.
3
Turn Child Lock on or off.
• When Child Lock is on, all front pan-
• When Child Lock is on, all front pan-
el buttons are disabled. You must
use the remote control to operate
the DVD Recorder+VCR.
use the remote control to operate
the DVD Recorder+VCR.
• To disable the Child Lock, select Off.
Panel Display
Sets the brightness of the front panel
display.
display.
1
Press SETUP.
2
Select System > Panel Display.
3
Choose from the following.
System Settings
Auto Dim – Dims between 10 PM and
6 AM.
On – Always on.
Off – Always off.
6 AM.
On – Always on.
Off – Always off.
Sleep Timer
Sets the sleep timer.
1
Press SETUP.
2
Select System > Auto Sleep.
3
Set the timer from 30 to 120 minutes.
• The DVD Recorder+VCR will power
• The DVD Recorder+VCR will power
off automatically if it has been inac-
tive for the specified length of time.
tive for the specified length of time.
• To disable the sleep timer, select Off.
RF Out Channel
Sets the RF Output Channel (the chan-
nel you set on your TV to view the DVD
Recorder+VCR).
nel you set on your TV to view the DVD
Recorder+VCR).
1
Press SETUP.
2
Select System > RF Output.
3
Set the RF Output Channel to 3, 4, or
Off.
Off.
Factory Settings
Restores the DVD Recorder+VCR to its
original factory settings.
original factory settings.
1
Press SETUP.
2
Select System > Default > Restore.
• The DVD Recorder+VCR will restart
• The DVD Recorder+VCR will restart
with all menu settings restored to
their factory defaults.
their factory defaults.
S
ETUP
S
ETUP
Playback
Language
Clock
Record
Audio
Exit
System
TV Tuner
Video Output Component
Auto Sleep
Off
Panel Display On
Child Lock
Off
RF Output
3
Default
-----------