Руководство Пользователя для GE 21098

NOTE: To change to “English,” press the language button again.

NOTE: In remote access mode, the system follows the selected language. The 
voice prompt language cannot be switched remotely.

This section shows you how to set up your answering system to receive 
incoming calls. Before you begin the set up process, you must turn on the 
answering system.

•  Press the answer on/off button to turn the answering system on and off. 

The MESSAGES indicator lights when the answering system is on. The 
indicator blinks when you have messages.

NOTE: The answering system displays “- -” when it is off.

To check the current day and time, press and release the DAY/CHECK button.
1. Make sure the answering system is ON.
2.  Press and hold the DAY/CHECK button to set the day of the week.
3. Press and hold the HOUR button to set the hour (a.m. or p.m.). Example: 

12AM, 1AM, or 12PM, 1PM.

4. Press and hold the MIN button to set the minute. Then press and release 

the MIN button to advance in 1-minute intervals or press and hold to 
increase in 5 minute intervals.

5. After the time is set, the real time clock will be displayed on the handset 

within 1 minute.

NOTE: You must set the day manually. You can choose to set the time 
manually as well though the time is automatically transmitted by your local 
phone company as part of Caller ID service. If you subscribe to Caller ID 
service, the current time is set automatically when you receive your first CID 
record.