Инструкции По Установке для Globalsat bt-368i
PAGE 2 OF 6
Bluetooth Quick-Start Set-Up Guid e 1.2
3. WINDOWS MOBILE 5 BLUETOOTH GPS SET-UP
To set up a Bluetooth connection with your Globalsat GPS receiver, follow these steps:
1.
Tap the Bluetooth icon in the lower-right corner of the screen
2.
Check "Turn on Bluetooth"
3.
Check "Make this device discoverable to other devices"
4.
Select Devices Tab and Tap New Partnership
5.
Tap "BT-GPS-XXXXXX" icon with a yellow sphere enclosing a black question mark and
select next
select next
6.
Enter the Passkey Code (or PIN code) for the GPS receiver and select "OK"
(For the BT-308 passkey code is 2003 and for the BT-328, BT-338 & BT-359 GPS receivers
it’s 0000).
7.
Check Serial Port followed by selecting "Finish"
8.
Select COM Ports tab and tap "New Outgoing Port"
9.
Select "BT-GPS-XXXXXX followed by selecting "Next"
10. Select the desired GPS COM port for your device (Secure Connection unchecked) followed
by selecting "Finish"
For Dell Axim X50v/ 51v Only:
The following instructions are intended for third party applications
in need of a specific GPS communication port.
Click Start, Settings. Choose the system tab on the bottom of the screen. Click on GPS.
Choose the "Programs" tab at the bottom of the screen, select COMX for GPS program port.
Choose the next tab labeled "Hardware", select the comm port from the previous step for the
GPS hardware port, Choose 4800 for baud rate. Choose the next tab labeled "Access", Check
the box "Manage GPS automatically(recommended)". Click OK.
Choose the "Programs" tab at the bottom of the screen, select COMX for GPS program port.
Choose the next tab labeled "Hardware", select the comm port from the previous step for the
GPS hardware port, Choose 4800 for baud rate. Choose the next tab labeled "Access", Check
the box "Manage GPS automatically(recommended)". Click OK.
(NOTE1: “X” represents the communication port number )
(NOTE2: Use any of the available communication ports from the navigation program in
use)
use)
NOTE:
In most cases, mapping and navigation software require you to manually configure the assigned COM
port of the GPS receiver in order to properly communicate and retrieve the GPS data. See your PDA’s
User Guide for more details on assigned COM ports and you navigation User’s Guide on how to properly
configure the GPS COM port to be read.
port of the GPS receiver in order to properly communicate and retrieve the GPS data. See your PDA’s
User Guide for more details on assigned COM ports and you navigation User’s Guide on how to properly
configure the GPS COM port to be read.