Руководство Пользователя для Minox dc 2133

13

You can use either 2 AA size batteries (Alkaline, Ni-MH) or a specified AC power
adapter as the power supply for the camera. Battery power is convenient for re-
cording images or video clips while AC adapter power is recommended for trans-
ferring images to your computer.

1. Make sure the camera is off.
2. Slide the battery/SD card cover in the direc-

tion of the OPEN arrow.

3. Insert the batteries according to the correct

polarity marks (+ or -).

4. Close the battery/SD card cover firmly.

• One CR-V3 Lithium battery pack is also acceptable for the power supply.

• If you won’t be using the batteries for an extended period of time, then remove them from the

camera to prevent leaks or corrosion.

• Never use manganese batteries.

• Never use different types of batteries together or mix old and new batteries.

• Low temperatures can shorten the battery life and reduce the performance. Avoid using them

in extremely cold environments.

1. Make sure the camera is off.
2. Open the DC IN jack cover and connect one

end of the AC power adapter to the DC IN
jack on the camera.

3. Connect the other end to an electrical outlet.

• Make sure to use only the specified AC power adapter (2.5A/3.3V) for the camera. Otherwise,

it may cause damages to the camera, which is not covered under the warranty.

• To prevent unexpected auto power off resulting from no battery power left during the process

of transferring your images to the computer, use the AC power adapter as a power supply.