Руководство Пользователя для ELO 1515l

Top: Polyester with outside hard-surface coating with clear or antiglare finish.

Inside: Transparent conductive coating.

Bottom: Glass substrate with uniform resistive coating. Top and bottom layers

separated by patented separator dots.

Standard deviation of error is less than 0.080 in. (2.03 mm). This equates to

less than ±1%.

More than 100,000 touchpoints/in

2

 (15,500 touchpoints/cm

2

).

Typically less than 4 ounces (113 grams).

Meets Taber Abrasion Test (ASTM D1044), CS-10F wheel, 500 g. Meets

pencil hardness 3H.

AccuTouch technology has been operationally tested to greater than 35

million touches in one location without failure, using a stylus similar to a finger.

Typically 85% at 550-nm wavelength (visible light spectrum).

All measurements made using USAF 1951 Resolution Chart, under 30 X

magnification, with test unit located approximately 1.5 in. (38 mm) from

surface of resolution chart.

Antiglare surface: 6:1 minimum.

Antiglare surface: Less than 15%.

Antiglare surface: 90 ± 20 gloss units tested on a hard-coated front surface.

C-32    User Guide