Инструкция для Sony kv-32fs120

❏

Check the orientation of the batteries.

❏

Batteries could be weak. Replace them (page 2).

❏

Move the TV three to four feet away from fluorescent lights.

❏

Make sure you have not inadvertently switched your TV from 
the channel 3 or 4 setting if you are using another device to 
change channels.

❏

You can use the front panel controls to access your menus, 
change channels, adjust the volume, or change video inputs 
(page 2). Contact your nearest Sony Dealer to order a 
replacement. To find out the nearest dealer, please call our Sony 
Direct Accessory and Part Center at 1-800-488-7669 (U.S. 
residents only).

❏

Make sure the power cord is plugged in.

❏

If a red light flashes on the front of your TV for more than a few 
minutes, disconnect and reconnect the power cord. If the 
problem continues, call your local service center.

❏

Check the TV/VIDEO setting. When watching TV, set it to TV; 
when watching video equipment, set it to VIDEO 1, 2, 3 or 4 
(page 4).

❏

Make sure you have inserted the batteries correctly into the 
remote control (page 2).

❏

Try another channel to rule out station trouble.

❏

Adjust the Picture setting in the Video menu (page 22).

❏

Adjust the Brightness setting in the Video menu (page 22).

❏

Check the antenna and/or cable connections (page 6).

❏

Adjust the Color setting in the Video menu (page 22).

❏

Check the Cable setting in the Channel menu (page 25).

❏

Check the antenna and/or cable connections (page 6).

❏

Make sure the channel selected is currently broadcasting.

❏

Adjust the antenna.

❏

Move the TV away from other electronic equipment. Some 
electronic equipment creates electrical noise, which can interfere 
with TV reception.

❏

Check your outdoor antenna or call your cable service.