Руководство Пользователя для Spectra Logic nastape 100
Chapter 4. Using the Serial Port Interface
41
Host Bus Adapters
To enable Jumbo Frames, the MTU parameter should be increased on the Gigabit
Ethernet host bus adapter (HBA) or on the network interface card (NIC) on the unit
and on Network Appliance. You can do this through the
Ethernet host bus adapter (HBA) or on the network interface card (NIC) on the unit
and on Network Appliance. You can do this through the
ifconfig
command on
Solaris and Network Appliance systems. On Windows NT and Windows 2000 systems,
the MTU size is configured in the driver. Check the Network Settings for the adapter
under the Control Panel. Each manufacturer implements this differently, so be sure to
check the HBA documentation for details on support of Jumbo Frames.
the MTU size is configured in the driver. Check the Network Settings for the adapter
under the Control Panel. Each manufacturer implements this differently, so be sure to
check the HBA documentation for details on support of Jumbo Frames.