Руководство Пользователя для Spectra Logic nastape 100

Appendix A.  Specifications

72

The criteria for a U.S. and Canadian 240 volt AC power cord for the NAStape are as 
follows:

• Power cord must have a molded NEMA 6-15P attachment plug on one end.

• Power cord must have a molded IEC 60320-type female connector to connect to the 

NAStape unit.

• Cordage must be SJT type, three-conductor, 18 AWG minimum.

• Power cord must comply with local electrical code.

The criteria for an international 200-240 volt AC power cord are as follows:

• Power cord must have an attachment plug of the proper type, rating, and safety 

approval for the intended country.

• Power cord must have a molded IEC 60320-type female connector to connect to the 

NAStape.

• Cord must be a flexible, HAR (harmonized) type H05VV-F, three conductor, cord 

with minimum conductor size of 0.03 square inches (1.0 square millimeter).

• Indoor use only

• Ordinary Protection: This product is not protected against the harmful ingress of 

moisture.

• Pollution Degree 2 for ambient pollution.

• Installation (Overvoltage) Category II for transient overvoltages.

• Mains Supply: Voltage fluctuations are not to exceed ± 10% of the rated nominal 

voltage range.