Руководство Пользователя для Spectra Logic spectra t120
Chapter 4. Drive Replacement
12
Determining the Drive’s Physical Location
The drive’s identifier is formatted as LTO-DRV
x
or SAIT-DRV
x
, depending on the type
of drive installed, and where
x
is the position in which the drive is installed in the
library.
For example, a drive identifier of
LTO-DRV4
indicates that the drive in question is an LTO
drive located in Drive Position 4. (Locate this example drive in the diagram below; it
has been underlined).
has been underlined).
Use Figure 4-3 to match the drive identifier to the drive’s correct physical location in
the library.
the library.
Note:
The drives retain their numbering scheme even if some of the drive
slots are empty.
slots are empty.
For example, if you only have three SAIT drives installed, and they
are installed in Drive Positions 3, 4, and 5, they will retain the
identifiers of SAIT-DRV3, SAIT-DRV4 and SAIT-DRV5, respectively.
are installed in Drive Positions 3, 4, and 5, they will retain the
identifiers of SAIT-DRV3, SAIT-DRV4 and SAIT-DRV5, respectively.
Figure 4-3 Drive designations as viewed from the back of the library.
Drive 5
Drive 6
Drive 4
Drive 2
Drive 3
Drive 1