Дополнительное Руководство для Spectra Logic spectra t120

10

1. Carefully unwrap the G4/G5 QIP from its anti-static bag.

2. Use the QIP’s handle to place the QIP into its bay.

3. Push the QIP gently but firmly inward until it clicks into place.

4. Use a #2 Phillips screwdriver to tighten the two captive screws on the side of the QIP.

Note:  The screws are on the right side on a QIP installed in a Spectra T950 library, and 

on the left side on a QIP installed in a Spectra T120 library.

5. Reattach any cabling that was connected to the QIP.

6. Proceed to Finish on page 11.