Release Note для Spectra Logic spectra t120

Chapter 6 – Loading Media and More Configuration

49

1. Log into the library with superuser or administrator privileges.

2. From the toolbar menu, select Configuration > System. The System Setup screen 

displays. 

3. Scroll down until you see the Other Settings pane (Figure 13 on page 48).

4. Clear the check box next to the metric you want to disable, then select Save.

You can configure the library to send the auto-save configuration file as an email 
attachment to a previously defined email recipient (highly recommended) as soon as 
the file is generated. The library sends the email whenever it performs an automatic 
configuration save operation. The auto-save file contains the library configuration and 
MLM database. The email includes instructions for using the attached file to restore the 
library configuration and MLM database.

Note:

To use the email option for the Auto Configuration Save feature, you must 
first configure a mail recipient for the person to whom you want the 
configuration file emailed. Refer to the Spectra T120 User Guide for 
information about configuring mail recipients.

In the event that you need to restore the library configuration, you can use either the 
auto-save configuration file from the LCM or the emailed copy (see Restoring the 
Library From an Auto-Save Configuration File on page 77).

Follow these steps to enable automatic emails.

1. Log into the library with superuser or administrator privileges.

2. From the toolbar menu, select Configuration > System. The System Setup screen 

displays (Figure 12 on page 47).

3. Scroll down to the Other Settings pane (Figure 13 on page 48).

tape drive performance

Enable Drive Performance Monitoring

power consumption

Enable Power Consumption Monitoring