Release Note для Spectra Logic spectra t120
Chapter 9 – Troubleshooting
75
Chapter 9 – Troubleshooting
Viewing Hardware Health Monitoring (HHM) Data (below)
Restoring the Library From an Auto-Save Configuration File on page 77
Restoring the MLM Database on page 81
Resetting the LCM on page 82
LTO Tape Drive Troubleshooting on page 83
Restoring the Library From an Auto-Save Configuration File on page 77
Restoring the MLM Database on page 81
Resetting the LCM on page 82
LTO Tape Drive Troubleshooting on page 83
Viewing Hardware Health Monitoring (HHM) Data
The advanced utility called HHM: View Data generates a report showing the current
status of the HHM counters. This information includes information about the following:
status of the HHM counters. This information includes information about the following:
Library serial number and name (if configured)
Information about key library components monitored by HHM, including the type
Information about key library components monitored by HHM, including the type
of reminder generated when the component reaches its maintenance threshold
Transporter moves: Drive To Drive Moves, Drive To Slot Moves, Slot To Slot Moves,
Slot To Drive Moves, Tap In Moves, and Tap Out Move
Follow these steps to view the current HHM data
1. Log into the library with superuser or administrator privileges.
2. If you want to save the HHM data report to a USB storage device, connect the
device to the USB port on the LCM before continuing.
Note:
The Save to USB option on the Utilities screen is only available if you
connect the USB storage device to the LCM USB port before you access
the advanced utilities.
connect the USB storage device to the LCM USB port before you access
the advanced utilities.
3. Select Maintenance > Tools > Utilities. The Utilities screen displays.
4. Select Show Advanced. The Advanced Utilities Confirmation screen displays.
5. Select Next. The Utilities screen refreshes to show a list of the advanced utilities.
Caution
In addition to the HHM: View Data utility, two additional
HHM utilities configure the HHM counters and thresholds for
the monitored components. Do not change the values for any
counters or thresholds unless specifically instructed to do so
by SpectraGuard Support.
HHM utilities configure the HHM counters and thresholds for
the monitored components. Do not change the values for any
counters or thresholds unless specifically instructed to do so
by SpectraGuard Support.