Release Note для Spectra Logic spectra t120
Configuring AutoSupport
December 2008
Spectra T950 Library
153
4. Select a value for the Partition Drive Failure Threshold from the drop-
down list. This is the only configurable critical event.
You can specify the threshold for the number of failed drives in a
partition that will cause an AutoSupport ticket request to be generated.
The threshold is a percentage of drives assigned to the partition. You
can choose 25% and 50%; the default is 50%. The threshold applies to all
partitions in the library.
partition that will cause an AutoSupport ticket request to be generated.
The threshold is a percentage of drives assigned to the partition. You
can choose 25% and 50%; the default is 50%. The threshold applies to all
partitions in the library.
5. Select Save or select Previous to return to the main AutoSupport screen
without saving your changes.
After your changes are saved, the Scheduled AutoSupport
Configuration screen redisplays with a confirmation message.
Configuration screen redisplays with a confirmation message.
Configure Log Set Forwarding
1. Select Log Forwarding from the main AutoSupport screen. The
Configure Log Forwarding screen displays.
Select Allow BlueScale to automatically send log sets if you want the
library to automatically generate and submit Auto Support Log sets
to a preconfigured recipient.
to a preconfigured recipient.
The autosupport@spectralogic.com mail recipient is automatically
selected. All Auto Support Log sets are automatically sent to
SpectraGuard Support.
SpectraGuard Support.
Select any additional mail recipient(s) from the Mail To choices
presented. Only mail recipients that have previously been
configured are listed.
configured are listed.
2. Select Next. The Save Profile screen displays. Verify that all of the
information shown is correct.
3. When all of the information is correct, select Save. The AutoSupport
Profiles screen redisplays.
Figure 88 The Configure Log Forwarding screen.