Release Note для Spectra Logic spectra t120

Spectra T950 Library Firmware — BlueScale10.4-20080828F

Release Notes 

90940002

13. Select Finish to complete the update process and reboot the library. 

The firmware updates do not take effect until the library completes the 
update process and automatically reboots.

Caution

Always select 

Finish to complete the update process and reboot the library. Do not 

manually reboot the LCM, power-cycle the library, or perform any other operations 
on the library when you see the Package Results screen. Doing so will cause the 
update process to fail.

Caution

Starting with the BlueScale10.4.0 firmware, IBM LTO-4 tape drives must be using 
firmware version 8940 or later.

Important

If you plan to upgrade the Fibre Channel tape drives in your library from LTO-3 to 
LTO-4, read 

for important information. Changes to the way a library generates the World Wide 
Node Name (WWNN) and World Wide Port Names (WWPN) for LTO-4 Fibre Channel 
drives will affect your SAN or HBA configurations.

Important

The IBM LTO-4 Fibre Channel drives currently shipping with the library are equipped 
two Fibre Channel ports. Read 

 for important information. To enable and use the dual ports:

ƒ

Your library must be using BlueScale10.4.0 or later firmware.

ƒ

The LTO-4 Fibre Channel drives must be using firmware version 8940 or later 
(see 

ƒ

If an LTO-4 Fibre Channel drive is connected to a SAN using zoning or to an HBA 
using persistent binding, you may also need to update your SAN or HBA 
configuration to include the WWPN for Port B, as described in