Инструкции По Установке для Spectra Logic treefrog
8
Testing the barcode scanner
Scanner testing
When you have completed installing your new or replacement barcode scanner, test it with
your TreeFrog. To do so:
your TreeFrog. To do so:
1.
Ensure that you have barcoded tapes in the cartridge magazine in your TreeFrog. If
you do not, manually insert some barcoded tapes into the magazine.
you do not, manually insert some barcoded tapes into the magazine.
2.
Power up the TreeFrog, then power up your computer. Start up the Virtual Control
Panel.
Panel.
3.
In the Virtual Control Panel, on the General button bar, click Inventory. The
Inventory Status window displays.
Inventory Status window displays.
4.
The Library Slots box displays information on the full and empty slots in the
cartridge magazine, including the barcode numbers of any barcoded tapes. Ensure
that the barcoded tapes in the magazine are all listed by their barcode number. If
they are not, click Update Inventory. The TreeFrog updates its inventory of all tape
slots.
cartridge magazine, including the barcode numbers of any barcoded tapes. Ensure
that the barcoded tapes in the magazine are all listed by their barcode number. If
they are not, click Update Inventory. The TreeFrog updates its inventory of all tape
slots.
5.
If you encounter any difficulties, contact Spectra Logic Technical Support at
1-800-227-4637. A Technical Support representative will be pleased to assist you.
1-800-227-4637. A Technical Support representative will be pleased to assist you.