Руководство Пользователя для Standard Horizon cp390i
Page 84
CP390i and CPF390i
4. Move the ShuttlePoint knob to highlight CHART PAGE and press [ENT] or move the
ShuttlePoint knob to the right.
5. Select the desired window, HIGHWAY or COMPASS, and press [ENT] or move the
ShuttlePoint knob to the right.
6. Press [CLR] or move the ShuttlePoint knob to exit the menu and show the Chart page.
12.0.3 Customizing the Data Windows
The data fields contained on the General, 1 Line Small/Large and 2 Line Small data windows
can be changed to the following selections:
can be changed to the following selections:
· MAX SPD
= Max Speed
· SOG
= Speed Over Ground
· COG
= Course Over Ground
· DST
= Distance to Destination
· BRG
= Bearing to Destination
1
· XTE
= Cross Track Error
· TTG
= Time To Go
· STR
= Steering
· HDG
= Heading from Electronic Compass
· DTP
= Depth
· SPD
= Speed
· ALT
= Altitude
· AWS
= Apparent Wind Speed
· AWD
= Apparent Wind Direction
· TWS
= True Wind Speed
· TWD
= True Wind Direction
· HDOP
= Horizontal Dilution of Precision
· VDOP
= Vertical Dilution of Precision
· Temp
= Water Temperature
· TLOG
= Trip Log
· DATE
= Current Date
· TIME
= Current Time
· VMG
= Velocity Made Good
· ETA
= Estimated Time of Arrival
· TRACKING = Tracking
· SCALE
· SCALE
= Chart Scale
· GPS Status = Shows GPS Fix Status (WAAS, 3D, 2D, ...)
NOTE
1
When the GENERAL window is selected and the GPS Chart Plotter is in Home Mode, the BRG
will show - - -, unless the GPS Chart Plotter is navigating to a point. When in Cursor Mode, the BRG
shows the Bearing from the ship’s position to the cursor location.
will show - - -, unless the GPS Chart Plotter is navigating to a point. When in Cursor Mode, the BRG
shows the Bearing from the ship’s position to the cursor location.
To select the desired field, follow the procedure:
1. Press and hold [MENU] until a field is highlighted (it will be shown in a yellow frame).
2. Move the ShuttlePoint knob to the desired data field (the yellow frame is moved to the
1. Press and hold [MENU] until a field is highlighted (it will be shown in a yellow frame).
2. Move the ShuttlePoint knob to the desired data field (the yellow frame is moved to the
desired data field) and press [ENT]. The popup window will be shown.
3. Move the ShuttlePoint knob up/down or left/right to choose the desired setting and press [ENT].
4. Press [CLR] to store and exit the editing mode.
4. Press [CLR] to store and exit the editing mode.
NOTE
Data window field on the NAVIGATION, HIGHWAY, GPS STATUS, and NMEA pages may be
customized in the above manner.
customized in the above manner.