Руководство Пользователя для StarTech cabcons1716i
Instruction Manual
38
Auto Scan: In this mode, the KVM automatically switches from one
powered computer to the next, sequentially in a fixed interval. During
Auto Scan mode, the OSD displays the name of the selected computer.
When Auto Scan detects any keyboard or mouse activity, it suspends the
scanning until activity stops; it then resumes with the next computer in
sequence. To abort Auto Scan mode, press the left <CTRL> twice. Scan
Type and Scan Rate set the scan pattern. Scan Type (<F4>: More\Scan
Type) determines if scanned computers must also be eye mark selected.
Scan Rate (<F4>: More\Scan Rate) sets the display interval when a
computer is selected before selecting the next one.
powered computer to the next, sequentially in a fixed interval. During
Auto Scan mode, the OSD displays the name of the selected computer.
When Auto Scan detects any keyboard or mouse activity, it suspends the
scanning until activity stops; it then resumes with the next computer in
sequence. To abort Auto Scan mode, press the left <CTRL> twice. Scan
Type and Scan Rate set the scan pattern. Scan Type (<F4>: More\Scan
Type) determines if scanned computers must also be eye mark selected.
Scan Rate (<F4>: More\Scan Rate) sets the display interval when a
computer is selected before selecting the next one.
Manual Scan: Scans through powered computers using keyboard con-
trol. Scan Type (<F4>: More\Scan Type) determines if scanned comput-
ers must also be eye mark selected. Press the up arrow key to select the
previous computer and the down arrow key to select the next computer.
Press any other key to abort the Manual Scan mode.
trol. Scan Type (<F4>: More\Scan Type) determines if scanned comput-
ers must also be eye mark selected. Press the up arrow key to select the
previous computer and the down arrow key to select the next computer.
Press any other key to abort the Manual Scan mode.
Audio Stick: A multimedia module can be LINKed to the back of each
KVM for selecting microphone and stereo speaker signals. There are two
options for Audio Stick: On and Off. When set to On, audio selection fol-
lows computer selection. When set to Off, audio selection stops following
computer selection. Off mode is useful if you want to listen to a particular
computer’s audio signal while operating other computers. The non-volatile
memory stores the Audio Stick setting. (Note: This is an optional feature
requiring that a separate device be connected to the master switch.)
KVM for selecting microphone and stereo speaker signals. There are two
options for Audio Stick: On and Off. When set to On, audio selection fol-
lows computer selection. When set to Off, audio selection stops following
computer selection. Off mode is useful if you want to listen to a particular
computer’s audio signal while operating other computers. The non-volatile
memory stores the Audio Stick setting. (Note: This is an optional feature
requiring that a separate device be connected to the master switch.)
Scan Type:
Ready PC + Eye: In Scan mode, scans through only powered
computers that are eyemarked selected.
computers that are eyemarked selected.
Ready PC: In Scan mode, scans through all powered computers. The
non-volatile memory stores the Scan Type setting.
non-volatile memory stores the Scan Type setting.
Scan Rate: Sets the duration of a computer displayed in Auto Scan mode.
The options are 3 seconds, 8 seconds, 15 seconds and 30 seconds.
The Scan Rate setting is stored in non-volatile memory.
The options are 3 seconds, 8 seconds, 15 seconds and 30 seconds.
The Scan Rate setting is stored in non-volatile memory.