Руководство Пользователя для StarTech cabcons1716i
Instruction Manual
41
Manual Scan:
Manual Scan enables you to manually switch back and forth between
powered computers: left Ctrl + left Ctrl + F2. Press the up or down
arrow to select the previous or next computer in sequence. Press any
other key to abort the Manual Scan.
powered computers: left Ctrl + left Ctrl + F2. Press the up or down
arrow to select the previous or next computer in sequence. Press any
other key to abort the Manual Scan.
NOTE: The Scan Type setting will determine whether computers must be
eye-marked to be included in the scan.
eye-marked to be included in the scan.
Scan Rate:
Scan Rate sets the duration between switching to the next computer in
Auto Scan mode: left <Ctrl> + left <Ctrl> + F3
Auto Scan mode: left <Ctrl> + left <Ctrl> + F3
The unit switches between scan intervals of 3, 8, 15 and 30 seconds.
Keyboard Typematic Rate:
You can adjust the keyboard typematic rate (given in characters/sec).
This setting overrides the keyboard typematic rate of your BIOS and
any operating system. To activate, key in left <Ctrl> + left <Ctrl> + F4,
following which the unit will switch between rates of 10, 15, 20 and 30
characters/sec.
This setting overrides the keyboard typematic rate of your BIOS and
any operating system. To activate, key in left <Ctrl> + left <Ctrl> + F4,
following which the unit will switch between rates of 10, 15, 20 and 30
characters/sec.
Audio Stick:
A multimedia module can be LINKed to the back of the master KVM for
selecting microphone and stereo speaker signals. There are two
options for Audio Stick: On and Off. When set to On, audio selection
follows computer selection. When set to Off, audio selection stops
following computer selection. It is useful if you want to listen to a
particular computer’s audio signal while operating other computers. To
activate, key in left Ctrl + left Ctrl + F5.
selecting microphone and stereo speaker signals. There are two
options for Audio Stick: On and Off. When set to On, audio selection
follows computer selection. When set to Off, audio selection stops
following computer selection. It is useful if you want to listen to a
particular computer’s audio signal while operating other computers. To
activate, key in left Ctrl + left Ctrl + F5.
Please note that this is an optional feature requiring that a separate
device be connected to the master switch.
device be connected to the master switch.