Справочник Пользователя для Juniper DPCE-R-40GE-SFP
•
SONET/SDH framing
•
Multiprotocol Label Switching (MPLS) fast reroute
•
Ingress behavior aggregate (BA) classification
•
Internal and loop clocking
•
Encapsulations:
•
MPLS fast reroute
•
MPLS CCC (circuit cross-connection)
•
MPLS TCC (translational cross-connection)
•
Cisco High-Level Data Link Control (cHDLC)
•
Cisco HDLC CCC
•
Cisco HDLC TCC
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
PPP over Frame Relay
NOTE:
Ethernet over Frame Relay is not supported.
Software features
•
SONET/SDH OC192/STM64 XFP transceivers:
•
Short reach (SR-1) (model number: XFP-10G-L-OC192-SR1)
•
Intermediate reach (IR-1) (model number: XFP-10G-E-OC192-IR2)
•
Long reach (LR-1) (model number: XFP-10G-Z-OC192-LR2)
Optical interface specifications—see SONET/SDH OC192/STM64 Optical Interface
Specifications
Specifications
NOTE:
To extend the life of the laser, when a MIC is not being actively used with any valid links,
take the MIC offline until you are ready to establish a link to another device. For information about
taking a MIC offline, see the
taking a MIC offline, see the
request chassis pic offline
command in the Junos OS Operational
Mode Commands.
Cables and connectors
OK/FAIL
LED, one bicolor:
•
Green—MIC is functioning normally
•
Yellow—MIC has failed
LINK
LED, one tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
LEDs
153
Copyright © 2013, Juniper Networks, Inc.
SONET/SDH OC192/STM64 MIC with XFP