Руководство По Подключению для jWIN jd-vd141

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Did you know that, 

to avoid possible 

electric shock or injury

, 

all electronic 

devices should be unplugged and 
turned off until all connections have 
been made

? If you haven’t done this, 

please do so for your safety before 
starting the installation. 

STEP 1: Choose your AV connection type. The 
video quality depends on the AV connection. If 
your TV supports 

 

•  Composite Video, go to 

 

•  S-Video, go to 

 

•  Component Video (Y, Pb/Cb, Pr/Cr), go to 

 

 

If you are not sure, please refer to the TV owner’s 
manual or choose Option 

  

 

 

 

STEP 2: Set up DVD video settings according to your selected connection. 

 

•  Turn on both your TV and DVD player. 

•  Set the AV mode of your TV to the selected video mode above. If you are not sure how to change the AV mode 

of your TV, please refer to your TV owner’s manual or call your TV manufacturer for Customer Support. If the AV 
mode of your TV is properly set and DVD player is turned on, you will see the jWIN logo on your TV screen. If 
not, please check all the cable connections and the AV mode of your TV.  

 
To change the video output setting, please refer to the setup section in the 
DVD instruction manual. 
 
Note: This DVD player offers two video output options with Component 
Video connection, interlaced-scan video output and progressive-scan video 
output. If your TV doesn’t support the progressive-scan video output, please 
set the video output to the interlaced-scan video output (INTERLACE-YUV).  

 
For S-VIDEO and COMPOSITE 
VIDEO connection, the setup 
procedure is not required. 
 
Enjoy your favorite DVD movies! 

a.  Locate the AV input 

on your TV. 

b.  Connect the cable(s) 

as shown on 

, 

, or 

. 

 

S-Video Cable 
not included 

Component Cable 
not included