Руководство Пользователя для poly-planar me-50
ME-50 Expansion Amplifier
3
————————————————————————————
1095 Mearns Rd. Warminster PA 18974 TEL (215) 675-7805
poly-planar
Waterproof Marine Audio
Mounting the Volume Control:
1) Choose a mounting location with a flat surface the size of the volume
control body
2) There must be at least 1-
1/4” (32mm) of clearance behind the mounting
area
3)
Drill a 7/8” (23mm) hole making sure that there is nothing behind the
surface that could be damaged.
surface that could be damaged.
4) Run all cables, make connections, and test the entire system. Extension
cables are optionally available if required.
5) Position unit, remove film from foam adhesive, and adhere volume
control in place. Warning, the adhesive is very, very sticky so be sure
that everything is functioning, and the panel is positioned very carefully
before applying pressure.
that everything is functioning, and the panel is positioned very carefully
before applying pressure.
1.25”
(32mm)
(32mm)
Drill 7/8”
(23mm) hole
(23mm) hole
Figure 2 - Volume Control Mounting