Руководство Пользователя для LG HR923S

15

C

onnecting

 

y If a connected HDMI device does not accept 

the audio output of the unit, the HDMI 
device’s audio sound may be distorted or 
may not output.

 

y When you use HDMI connection, you can 

change the resolution for the HDMI output. 
(Refer to “Resolution Setting” on page 18.)

 

y Select the type of video output from the 

HDMI OUT jack using [HDMI Color Setting] 
option on the [Setup] menu (see page 33).

 

y Changing the resolution when the 

connection has already been established 
may result in malfunctions. To solve the 
problem, turn off the player and then turn it 
on again.

 

y When the HDMI connection with HDCP is 

not verified, TV screen is changed to black 
screen. In this case, check the the HDMI 
connection, or disconnect the HDMI cable.

 

y If there is noise or lines on the screen, please 

check the HDMI cable (length is generally 
limited to 4.5m).

 

,

Note

 

y When you connect a HDMI or DVI compatible 

device make sure of the following:

 

- Try switching off the HDMI/DVI device and 

this player. Next, switch on the HDMI/DVI 
device and leave it for around 30 seconds, 
then switch on this player.

 

- The connected device’s video input is set 

correctly for this unit.

 

- The connected device is compatible with 

720x576p, 1280x720p, 1920x1080i or 
1920x1080p video input.

 

y Not all HDCP-compatible HDMI or DVI devices 

will work with this player.

 

- The picture will not be displayed properly 

with non-HDCP device.

 

- This player does not playback and TV screen 

is changed to black screen.

Once you have completed setting the digital 
receiver to your individual preferences, you can 
proceed, if necessary, to adjust the unit settings 
to your antenna. The menu [Satellite Setting] 
contains the satellites that have been selected in 
the installation assistant. If the installation assistant 
was interrupted, the satellite position [Astra19.2E] 
is pre-programmed. Should you wish to receive 
other satellites, or if you are using a different type 
of LNB, you can adjust your digital receiver to the 
appropriate data as follows:.

1.  Select [Satellite Setting] option in the [DTV] 

menu, then press ENTER (b). 

If the [DTV Lock] option is set to [Lock], this 
function is available when you enter the 
password correctly. (see page 30 .)

 

,

Note

2.  The [Satellite Setting] menu appear on the 

screen. Use W/S to select the [Antenna 

Setting] and then press ENTER (b).

3. Use A/D to select a desired particular 

satellite.