Техническая Спецификация для Cisco Aironet 1142N AIR-LAP1142N-C-K9
Модели
AIR-LAP1142N-C-K9
Data Sheet
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 6
Item
Specification
Maximum Transmit Power
2.4GHz
● 802.11b
◦
20 dBm with 1 antenna
● 802.11g
◦
20 dBm with 2 antennas
● 802.11n (HT20)
◦
20 dBm with 2 antennas
5GHz
● 802.11a
◦
20 dBm with 2 antennas
● 802.11n non-HT duplicate (802.11a duplicate) mode
◦
20 dBm with 2 antennas
● 802.11n (HT20)
◦
20 dBm with 2 antennas
● 802.11n (HT40)
◦
20 dBm with 2 antennas
Note:
The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
Available Transmit Power
Settings
Settings
2.4GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
5GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
Note:
The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
Integrated Antenna
● 2.4 GHz, Gain 4.0 dBi, horizontal beamwidth 360°
● 5 GHz, Gain 3 dBi, horizontal beamwidth 360°
● 5 GHz, Gain 3 dBi, horizontal beamwidth 360°
Interfaces
● 10/100/1000BASE-T autosensing (RJ-45)
● Management console port (RJ45)
● Management console port (RJ45)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader
errors
Dimensions (W x L x H)
● Access point (without mounting bracket): 8.7 x 8.7 x 1.84 in. (22.1 x 22.1 x 4.7 cm)
Weight
● 2.3 lbs (1.04 kg)
Environmental
● Nonoperating (storage) temperature: -22 to 185°F (-30 to 85°C)
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (non-condensing)
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (non-condensing)
System Memory
● 128 MB DRAM
● 32 MB flash
● 32 MB flash
Input Power Requirements
● AP1140: 44 to 57 VDC
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
Powering Options
● 802.3af Ethernet Switch
● Cisco AP1140 Power Injectors (AIR-PWRINJ4=)
● Cisco AP1140 Local Power Supply (AIR-PWR-B=)
● Cisco AP1140 Power Injectors (AIR-PWRINJ4=)
● Cisco AP1140 Local Power Supply (AIR-PWR-B=)
Power Draw
● AP1140: 12.95 W
Note:
When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some
amount dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W,
bringing the total system power draw (access point + cabling) to 15.4W.
bringing the total system power draw (access point + cabling) to 15.4W.
Warranty
Limited Lifetime Hardware Warranty