Руководство Пользователя для LG 60PZ850

40

PENTOUCH

Unpairing (Resetting touch pen)    

1

  Pairing fails if the dongle driver is not installed 

on the computer. 

2

  Pairing fails if the LED indicator on the dongle 

is not red.

3

  Remove the dongle from the PC, reinsert it and 

try pairing.

1

  Press the   /Home button on the touch pen 

and check that the red LED blinks once.

2

  Press and hold the   /Home button on the 

touch pen for 9 to 10 seconds.

3

  When the green light blinks once, release the 

button. The red light blinks 3 times and the pen 
is then in its initial state (unpaired).

When Pairing Fails

NOTE

 

y

Pairing is required only when using the 
touch pen for the first time. Next time 
you want to use the touch pen, insert the 
Pentouch dongle first. If the two indicators 
turn red, press the   /Home button.

2

  Keep the touch pen within 50 cm of the dongle. 

Press the   /Home button on the touch pen 
once. The LED indicator on the touch pen will 
turn red for 2 seconds and blink green 3 times 
when pairing is complete.

3

  Once the touch pen is paired, the red LED will 

blink once when you press the   /Home but-
ton.

Caution When Unpairing

1

  Be careful not to unpair the pen by mistake. If 

unpaired, try pairing it again.

2

  If you unpair and pair a normally functioning 

touch pen, the other paired pen may not work. 
In this case, unpair the nonfunctioning touch 
pen and pair it again by following the steps de-
scribed in the Pairing for the First Time section.

Touch pen Operation

Once paired, you can use the touch pen in the 
following ways.

1

  Powering on

- Press the   /Home button once. The red and 

green LEDs will remain lit to indicate that the 
power is on.

2

  Powering off

-  Press and hold the   /Home button. 
   When the red LED turns on once briefly and 

once again, release the button. The red LED 
blinks 3 times and the pen is then powered 
off.

3

  Pressing the   /Home button while using the 

touch pen
-  In the Pentouch program: Shows or hides 

the toolbar of the feature.

-  In Windows: Works in the same way as the 

right-click function.  
Point the touch pen at an object you want to 
right-click, then press the button.

4

  The double-click function may not work as 

intended in Windows XP or Windows Vista. 
If this is the case, use the   /Home button 
(right-click) instead.

5

  The touch pen works in the same way as the 

mouse in Windows.

 

y

 After 3 hours of a continuous charge, you 
can use the touch pen for about 8 hours. 

 

y

 Pentouch operation may not be normal 
while charging.

 

y

Green LED will be turned on during using 
touch-pen. If you don’t use touch-pen, it will 
be automatically turned off after 1 minute. 

 

y

 Touch pen LED indicator for battery status
- Charging: Red LED
- Charging complete: Green LED
- Battery level 20% or less: Red LED blinks 

every 3 seconds

- No battery power: Red LED blinks every 

second and powers off automatically.

NOTE