Инструкция для Sony FWD-S47H1
2-2
GXD-L52H1
SNMP Setting window (on Web Page)
2-2. Specifi cations of SNMP Installation
The specifi cations of the SNMP agent installed in this unit are shown in below.
. SNMP version:
. SNMP version:
SNMPv1
. MIB defi nition:
SMIv2
. Support PDU:
GetRequesat
SetRequest
GetNextRequest
Trap
. Standard MIB to be installed: MIB-II
GetNextRequest
Trap
. Standard MIB to be installed: MIB-II
2-3. Installation
The setting below is required to use the SNMP function of this unit. (Set according to your network
environment and SNMP management environment.)
. Community and its Community property
. Authentication trap
. Host restriction
environment and SNMP management environment.)
. Community and its Community property
. Authentication trap
. Host restriction
The Web server function of this unit is used for setting. Refer to the Operation Manual of this unit for the
operation of the Web server.
The contents of each item and the setting of SNMP are fully described in this specifi cation.
operation of the Web server.
The contents of each item and the setting of SNMP are fully described in this specifi cation.
2-4. Operation of SNMP Setting Window
This section describes the procedure and contents for
setting of SNMP.
Open the Web page of this unit and click the [SNMP]
button in the Advanced setting item on the Setup page
(where an administrator’s password is necessary). The
SNMP setting window is displayed.
setting of SNMP.
Open the Web page of this unit and click the [SNMP]
button in the Advanced setting item on the Setup page
(where an administrator’s password is necessary). The
SNMP setting window is displayed.
. User name: root
. Password: pudadm
\
. Password: pudadm
\