Справочник Пользователя для Sony ICS-SP20

ICS-SP20 User Manual 

 

12

If the password is reset, the user is prompted to enter new password on his/her first access to V-Chip 

limit. For all subsequent accesses the user will have to use the password that was specified during the first 
access.  In the event the password is forgotten the V-Chip settings can reset by holding the enter button 
for  5 sec.  When prompted for the password enter right, left, right, left, enter and it will be reset to default 
values. 

 
 

 

Key on remote is pressed but 

nothing happens 

See if the upper LED of ICS-SP20 is fast-blinking while 

pressing key and aiming remote at IR sensor on the display. 
If it is not -– check the batteries in the remote. 

Image is Green 

Make certain Option slot is select to YPbPr 

No control of the display via 

Menus 

Under panel settings check to see if correct model is 

selected. 

No Image 

Check to see if Option Slot is selected as source 

Cannot switch to a particular TV 

channel using channel +/- 
browse keys. 

The channel is selectable by browsing keys only if it is 

marked as “valid”. To be marked as “valid” the channel must 
have a good TV signal during the “channel scan” operation. 

Repeat the channel scan (making sure aerial/cable 

connection is good). Also the channel validity can be edited 

manually.