Инструкция для Sony ICS-FW40

 

FW40 Commander Software Users Guide

©

 

Version- 1.0a 

 

 

- 13 – 

www.technovare.com 

(Settings),

 

 

For ease of use, the default Port setting of 53484 is already filled 
in.  It does not need to be changed unless you need to access 
the device though a router from a WAN.  If this is the case, you 
will need to perform the following alternate steps to add each of 
the devices: 

1.  Decide upon a unique port number that is not already in 

use by the router.  (i.e. it is not already being 
forwarded from the WAN to the LAN.) 

2.  Configure your router to forward the unique port 

number you chose in step 1 from the WAN side to port 
53484 and the IP Address of the device on the LAN 
side.   

3.  Enter the following values into the form above and 

press “Add” once for each device you would like to add: 

•  Name: A unique identifier. 

•  IP Address: The IP Address of the router on the 

WAN. 

•  Port: The port number you chose in step 1. 

 

Step 1:  

Enter a name for 

the new device 

Step 2:  

Enter the IP 

Address

Step 3: Press 

the “Add” 

button