Инструкция для Sony SFM3

 

SFM3

 

 

 

Installation Manual  

Page - 3 - 

 

 
WARNING:  THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE (5) 

TIMES THE WEIGHT OF THE DISPLAY. IF NOT, THE WALL STRUCTURE MUST BE 
REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE 
TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE 
ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL 
INJURY, OR EVEN DEATH. 

 

 

WARNING:  SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE 

INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR 
THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY. 

 

 

WARNING:  PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION 

INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE 
INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY 
AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN 
EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. 

 
 

 

Indicates that the power plug is to be 
disconnected from the power outlet. 

 

 

Contact Sony Electronics with any 
questions. 

 

 

 

 

 

 

Safety precautions must be taken at all 
times. 

 

 

 

 

 

 

 

 

 

Warning and Caution statements. 

 

 

 

 

 

 

 

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do 
so could result in damage to the display and/or damage to the mounting surface. 

 

 

 

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat 
energy. Failure to do so may result in damage to the display and could increase the risk of fire. 

 

 

 

At least two qualified people should perform the installation procedure. Injury and/or damage can 
result from dropping or mishandling the plasma display. 

 

 

 

Recommended mounting surfaces: wooden studs and solid-flat concrete. If the mount is to be 
installed on any surface other than wooden studs, use suitable hardware (which is commercially 
available).