Инструкция для Sony CPD-G400

6

D:\###sagyou\08 gatu\0827-y\386760621CPD-G400\01US03BAS-UC.fm

CPD-G400

3-867-606-21 (1)

Before using your monitor, check that the following accessories 
are included in your carton:
• Power  cord
• Macintosh adapter (1)
• Windows Monitor Information Disk
• Warranty card
• Notes on cleaning the screen’s surface
• This instruction manual

Turn off the monitor and computer before connecting.

• Do not touch the pins of the video signal cable connector as this might 

bend the pins.

• When connecting the video signal cable, check the alignment of the 

HD15 connector. Do not force the connector in the wrong way or the 
pins might bend.

x

x

* Connect the supplied Macintosh adapter to the computer before 

connecting the cable. This adapter is compatible with Macintosh LC, 
Performa, Quadra, Power Macintosh and Power Macintosh G3 series 
computers (sold before January, 1999). If you are connecting to a 
Power Macintosh G3 series that sold after January 1999, you will need 
a different adapter (not supplied). Macintosh II series and some older 
versions of PowerBook models may need an adapter with micro 
switches (not supplied).

x

IBM PC/AT or 
compatible computer

to video output

Use the supplied Macintosh adapter.

Macintosh adapter (supplied)

*

Macintosh or 
compatible computer

to video 
output

Refer to the preceding examples 
to connect your computer.

HD15 video signal 
cable (not supplied)

to video input 2 
connector (

y

 2)