Инструкция для Sony SAT-HD100

Скачать
Страница из 96
28
Selecting an Antenna
You or your professional installer can choose to view information about 
your Satellite Dish Antenna or your digital TV antenna. After you have 
entered your antenna type, you can use the Antenna Location pop-up to 
help aim your Satellite Dish Antenna or the Signal Strength Meter to help 
aim your Satellite Dish Antenna or your digital TV antenna.
1
Highlight and select “Antenna” from the Antenna 
display.
The Antenna Type display appears.
2
Highlight and select either “DIRECTV” or “Digital TV” 
depending on which type of antenna you will check.
The DIRECTV Antenna Type display appears if you selected 
“DIRECTV”.
The digital TV antenna information appears on the antenna 
display if you selected “Digital TV”. You can then use the Signal 
Strength Meter to help aim your digital TV antenna.
3
If you selected “DIRECTV” in step 2, highlight and select 
the Satellite Dish Antenna type you have installed
The Signal Seeker pop-up appears on the Antenna display if you 
selected “Round”. Skip to step 5 if you selected “Oval 2-Sat” or 
“Oval 3-Sat”.
4
If you selected “Round” in step 3, highlight and select 
“On”.
The Signal Seeker pop-up closes to show the DIRECTV Antenna 
Type Display.
Tip
Selecting “off” in the Signal Seeker 
pop-up may allow you to see the Signal 
Strength Meter if you use a diplexer or 
certain other accessories with your 
Satellite Dish Antenna.
Note
The Signal Seeker feature is available 
only with the Sony Round Antenna. 
See your Satellite Dish Antenna 
Installation Instructions for more 
information about this feature.
Setting Up Your Digital Satellite Receiver (SYSTEM)
(continued)