Инструкция для Sony SAT-HD100
31
Usi
n
g
t
h
e
O
n
-Screen
Di
sp
lays
sp
lays
Setting the VCR Manufacturer Code
The VCR Manufacturer Code allows the Digital Satellite Receiver to
control your VCR using the VCR Controller or a Sony SmartFile VCR.
control your VCR using the VCR Controller or a Sony SmartFile VCR.
1
Highlight and select “Manufacturer” from the VCR
Control display (see page 30).
Control display (see page 30).
The Manufacturer pop-up appears.
2
Highlight and select the manufacturer of your VCR.
The manufacturer’s pop-up appears.
3
Select a VCR manufacturer code from the list.
The Test pop-up appears.
Some manufacturers have more than one code to choose from.
If the VCR manufacturer code you select does not work in step 4
below you can select another code for that manufacturer.
Some manufacturers have more than one code to choose from.
If the VCR manufacturer code you select does not work in step 4
below you can select another code for that manufacturer.
4
Select “Yes” to perform a VCR test.
If you select “Yes”, a pop-up appears giving you instructions on
how to perform a VCR test.
how to perform a VCR test.
If the test is unsuccessful, check your connections and the VCR
Controller placement, then repeat this procedure selecting a
different VCR manufacturer code in step 3 (if your VCR
manufacturer has more than one code).
Controller placement, then repeat this procedure selecting a
different VCR manufacturer code in step 3 (if your VCR
manufacturer has more than one code).
z
Tip
If you connected a Sony SmartFile VCR,
use the manufacturer code of 99.
use the manufacturer code of 99.
Note
Do not stop or interrupt the VCR test by
pressing any buttons until after the VCR
test is complete.
pressing any buttons until after the VCR
test is complete.