Инструкция для Sony SUB463S
4
US
3
Attach the supplied Joint to the
rear of the TV with the three
screws (PSW5 × 16) (supplied).
rear of the TV with the three
screws (PSW5 × 16) (supplied).
Slide the supplied Joint up to attach.
~
• Make sure to keep the removed screws.
• When removing the Table-Top Stand from the
• When removing the Table-Top Stand from the
Display, lay the display face down on a stable
work surface that is larger than the Display.
work surface that is larger than the Display.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
work surface.
• If pressure or shock is applied to the surface of the
Display, the LCD display may break or become
damaged.
damaged.
• Lay the display face down on a stable and level
surface with the Table-Top Stand hanging over the
edge of the surface.
Having the display face and the base of the Table-
Top Stand on the same level surface will create an
unstable working condition and can damage the
Display.
edge of the surface.
Having the display face and the base of the Table-
Top Stand on the same level surface will create an
unstable working condition and can damage the
Display.
Joint
Joint Screw
(PSW5 × 16)
(PSW5 × 16)
CAUTION
4
Install the TV onto the TV Stand.
When installing the TV on the TV Stand, hold
the TV as shown in the illustration and install
it on the two brackets of the TV Stand.
the TV as shown in the illustration and install
it on the two brackets of the TV Stand.
Arrow direction shows front of the TV
Stand.
5
Secure the TV and the TV Stand
with the three TV Stand Neck
Attachment Screws (PSW5 × 16)
(supplied).
with the three TV Stand Neck
Attachment Screws (PSW5 × 16)
(supplied).
TV Stand Neck
Attachment Screw
(PSW5 × 16)
Attachment Screw
(PSW5 × 16)