Инструкция для Sony DAVTZ140

Скачать
Страница из 2
Color System Setup
Connect the AC power cord (mains 
lead).
Turn on the power of the main unit 
and TV.
/
/
Press FUNCTION repeatedly or DVD/
CD to switch the function to DVD/CD.
Playback starts automatically if a disc 
with an auto playback function is loaded. 
Press  twice to stop playback.
Switch the input selector on your TV 
to display “Home Theatre System.”
Press SETUP in stop mode.
The Setup Menu appears.
Press / repeatedly to select 
[Preference Page], then press  .
Press / repeatedly to select [TV 
Type], then press  .
Press / repeatedly to select [PAL] 
or [NTSC] from the displayed list, then 
press  .
Press SETUP to turn off the Setup 
Menu.
Note
 The display on the TV screen may be 
interrupted momentarily after changing the 
color system as described above.
DVD Home Theatre 
System
4-299-353-12(2)
DAV-TZ140
Operating Instructions
WARNING
To reduce the risk of fire or electric shock, do 
not expose this apparatus to rain or moisture.
To reduce the risk of fire or electric shock, do 
not expose this apparatus to dripping or 
splashing, and do not place objects filled with 
liquids, such as vases, on the apparatus.
To reduce the risk of fire, do not cover the 
ventilation opening of the apparatus with 
newspapers, tablecloths, curtains, etc.
Do not place the naked flame sources such as 
lighted candles on the apparatus.
As the main plug is used to disconnect the 
unit from the mains, connect the unit to an 
easily accessible AC outlet. Should you notice 
an abnormality in the unit, disconnect the 
main plug from the AC outlet immediately.
The main plug is used to disconnect this 
device from the AC outlet, so position this 
device in a location where it can be easily 
unplugged.
Do not install the appliance in a confined 
space, such as a bookcase or built-in cabinet.
Do not expose batteries or apparatus with 
battery-installed to excessive heat such as 
sunshine, fire or the like.
The unit is not disconnected from the mains 
as long as it is connected to the AC outlet, 
even if the unit itself has been turned off.
To prevent injury, this apparatus must be 
securely attached to the floor/wall in 
accordance with the installation instructions.
Indoor use only.
CAUTION
The use of optical instruments with this 
product will increase eye hazard.
For European models
This appliance 
is classified as a 
CLASS 1 
LASER product. 
This marking is 
located on the 
rear exterior.
Notice for customers: The following 
information is only applicable to equipment 
sold in countries applying EU directives.
The manufacturer of this product is Sony 
Corporation, 1-7-1 Konan Minato-ku Tokyo, 
108-0075 Japan. The Authorized 
Representative for EMC and product safety is 
Sony Deutschland GmbH, Hedelfinger Strasse 
61, 70327 Stuttgart, Germany. For any service 
or guarantee matters please refer to the 
addresses given in separate service or 
guarantee documents.
This equipment has been tested and found to 
comply with the limits set out in the EMC 
Directive using a connection cable shorter 
than 3 meters. (European models only)
For the customers in the USA
Owner’s Record
The model and serial numbers are located on 
the rear exterior of the unit. Record these 
numbers in the space provided below. Refer 
to them whenever you call upon your Sony 
dealer regarding this product.
Model No. DAV-TZ140
Serial No.______________
The following FCC statement applies only to 
the version of this model manufactured for 
sale in the USA. Other versions may not 
comply with FCC technical regulations.
2
3
4
6
7
8
5
10
11
12
9
14
15
16
13
NOTE:
This equipment has been tested and found to 
comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. This 
equipment generates, uses, and can radiate 
radio frequency energy and, if not installed 
and used in accordance with the instructions, 
may cause harmful interference to radio 
communications. However, there is no 
guarantee that interference will not occur in a 
particular installation. If this equipment does 
cause harmful interference to radio or 
television reception, which can be determined 
by turning the equipment off and on, the user 
is encouraged to try to correct the 
interference by one or more of the following 
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the 
equipment and receiver.
Connect the equipment into an outlet on a 
circuit different from that to which the 
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
CAUTION
You are cautioned that any changes or 
modifications not expressly approved in this 
manual could void your authority to operate 
this equipment.
Important Safety Instructions
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. 
Install in accordance with the 
manufacturer’s instructions.
8)  Do not install near any heat sources such 
as radiators, heat registers, stoves, or 
other apparatus (including amplifiers) 
that produce heat.
9)  Do not defeat the safety purpose of the 
polarized or grounding-type plug. A 
polarized plug has two blades with one 
wider than the other. A grounding type 
plug has two blades and a third grounding 
prong. The wide blade or the third prong 
are provided for your safety. If the 
provided plug does not fit into your 
outlet, consult an electrician for 
replacement of the obsolete outlet.
10) Protect the power cord from being 
walked on or pinched particularly at 
plugs, convenience receptacles, and the 
point where they exit from the apparatus.
11) Only use attachments/accessories 
specified by the manufacturer.
12) Use only with the cart, stand, tripod, 
bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination 
to avoid injury from tip-over.
13) Unplug this apparatus during lightning 
storms or when unused for long periods 
of time.
14) Refer all servicing to qualified service 
personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as power-supply cord or plug is 
damaged, liquid has been spilled or 
objects have fallen into the apparatus, the 
apparatus has been exposed to rain or 
moisture, does not operate normally, or 
has been dropped.
For North American, Mexican, 
and Brazilian models
This symbol is intended to alert the 
user to the presence of uninsulated 
“dangerous voltage” within the 
product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock to persons.
This symbol is intended to alert the 
user to the presence of important 
operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.
For the customers in Europe, 
Russia and Australia
Disposal of Old Electrical & 
Electronic Equipment 
(Applicable in the European 
Union and other European 
countries with separate 
collection systems)
This symbol on the product or 
on its packaging indicates that 
this product shall not be treated as household 
waste. Instead it shall be handed over to the 
applicable collection point for the recycling of 
electrical and electronic equipment. By 
ensuring this product is disposed of correctly, 
you will help prevent potential negative 
consequences for the environment and 
human health, which could otherwise be 
caused by inappropriate waste handling of 
this product. The recycling of materials will 
help to conserve natural resources. For more 
detailed information about recycling of this 
product, please contact your local Civic 
Office, your household waste disposal service 
or the shop where you purchased the product. 
Applicable accessories: Remote Control.
Disposal of waste batteries 
(applicable in the European 
Union and other European 
countries with separate 
collection systems)
This symbol on the battery or 
on the packaging indicates that the battery 
provided with this product shall not be 
treated as household waste. 
On certain batteries this symbol might be 
used in combination with a chemical symbol. 
The chemical symbols for mercury (Hg) or 
lead (Pb) are added if the battery contains 
more than 0.0005% mercury or 0.004% lead. 
By ensuring these batteries are disposed of 
correctly, you will help prevent potentially 
negative consequences for the environment 
and human health which could otherwise be 
caused by inappropriate waste handling of the 
battery. The recycling of the materials will 
help to conserve natural resources.
In case of products that for safety, 
performance or data integrity reasons require 
a permanent connection with an incorporated 
battery, this battery should be replaced by 
qualified service staff only. To ensure that the 
battery will be treated properly, hand over the 
product at end-of-life to the applicable 
collection point for the recycling of electrical 
and electronic equipment.
For all other batteries, please view the section 
on how to remove the battery from the 
product safely. Hand the battery over to the 
applicable collection point for the recycling of 
waste batteries.
For more detailed information about 
recycling of this product or battery, please 
contact your local Civic Office, your 
household waste disposal service or the shop 
where you purchased the product.
Checking the supplied items
 Speakers (5)
 Operating Instructions 
(this manual)
 Video cord** (1)
 FM wire antenna (aerial) (1)
 Remote commander 
(remote) (1)
 R6 (size AA) batteries* (2)
 Subwoofer (1)
 High Speed HDMI cable** (1)
 Main unit (1)
*  U.S. models only.
** High Speed HDMI cable and video cord are included only in certain areas.
Preparing the remote control
Insert two R6 (size AA) batteries by matching the  and  ends on the batteries to the 
markings inside the compartment.
Trademarks
This system incorporates with Dolby* Digital 
and Dolby Pro Logic adaptive matrix 
surround decoders.
*  Manufactured under license from Dolby 
Laboratories. 
Dolby, Pro Logic, and the double-D 
symbol are trademarks of Dolby 
Laboratories.
This system incorporates High-Definition 
Multimedia Interface (HDMI™) technology. 
HDMI, the HDMI Logo, and High-Definition 
Multimedia Interface are trademarks or 
registered trademarks of HDMI Licensing 
LLC in the United States and other countries.
“PlayStation” and “PS3” are registered 
trademarks of Sony Computer Entertainment 
Inc.
“BRAVIA” is a trademark of Sony 
Corporation.
MPEG Layer-3 audio coding technology and 
patents licensed from Fraunhofer IIS and 
Thomson.
Windows Media is either a registered 
trademark or trademark of Microsoft 
Corporation in the United States and/or other 
countries. This product contains technology 
subject to certain intellectual property rights 
of Microsoft. Use or distribution of this 
technology outside of this product is 
prohibited without the appropriate license(s) 
from Microsoft.
ABOUT MPEG-4 VISUAL: THIS PRODUCT 
IS LICENSED UNDER THE MPEG-4 
VISUAL PATENT PORTFOLIO LICENSE 
FOR THE PERSONAL AND 
NONCOMMERCIAL USE OF A 
CONSUMER FOR DECODING VIDEO IN 
COMPLIANCE WITH THE MPEG-4 
VISUAL STANDARD (“MPEG-4 VIDEO”) 
THAT WAS ENCODED BY A CONSUMER 
ENGAGED IN A PERSONAL AND 
NONCOMMERCIAL ACTIVITY AND/OR 
WAS OBTAINED FROM A VIDEO 
PROVIDER LICENSED BY MPEG LA TO 
PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE 
IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION 
INCLUDING THAT RELATING TO 
PROMOTIONAL, INTERNAL AND 
COMMERCIAL USES AND LICENSING 
MAY BE OBTAINED FROM MPEG LA, 
LLC. SEE http://www.mpegla.com/
All other trademarks are trademarks of their 
respective owners.
About these Operating 
Instructions
“DVD” may be used as a general term for a 
DVD VIDEO, DVD+RW/DVD+R, and 
DVD-RW/DVD-R.
The system enters standby mode 
automatically.
When the system is in pause, stop, open, or 
no disc mode, the system will enter standby 
mode automatically after 30 minutes.
Depending on the jacks on your TV or set-top box, select the video and audio connection method.
AUDIO OUT
L
R
VIDEO IN
HDMI IN
AUDIO OUT
L
R
VIDEO IN
HDMI IN
When connecting a TV and set-top box/PlayStation®3
Connecting a video cord and an audio cord
Select *1 or *2 for the video connection based on the jacks on the TV.
When connecting to a TV only
The TV has AUDIO OUT jacks*4:
Video 
Audio 
*1
*2
*3
Video
Audio
*2
*3
AUDIO OUT
L
R
VIDEO IN
HDMI IN
The TV does not have AUDIO OUT jacks:
*1
*2
*3
Set-top box/
PS3™
Video
Video
Video
Audio
The TV has AUDIO OUT jacks:
*1
Video
Audio
Audio
Set-top box/
PS3™
Connecting the Speakers
Caution
Do not use any speakers other than those supplied with this system.
Insert the speaker cords to match the color of the SPEAKERS terminals of the unit.
SUBWOOFER
SUR L
SUR R
FRONT R
CENTER
FRONT L
Main unit
Rear panel of the main unit
Note
 Connect the speaker cord with the colored 
tube to +.
Contact area (–)
Colored tube
Contact area (+)
Covering
Speaker cord
Colored tube
FRONT LEFT: White
FRONT RIGHT: Red
CENTER: Green
SURROUND LEFT: Blue
SURROUND RIGHT: Gray
SUBWOOFER: Purple
SURROUND
RIGHT
LEFT
CENTERSUBWOOFER
FRONT
RIGHT
LEFT
SPEAKERS
IMPED
ANCE USE 8Ω
Purple
Blue
Green
Gray
White
Red
 
/ (on/standby)
Turns on the unit, or sets it to standby 
mode.
 
Play operation buttons
 (open/close)
Opens or closes the disc tray.
 (play)
Starts or re-starts playback (resume play).
 (stop)
Stops playback and remembers the stop 
point (resume point).
The resume point for a title/track is the 
last point you played.
FUNCTION
Selects the playback source.
  
VOLUME –/+
Adjusts the system’s volume.
  
 (USB) port
Used for connecting a USB device.
 
Disc tray
 
Front panel display
  
 (remote sensor)
Remote control
SHIFT 
Press and hold this button to use buttons with 
purple text labels.
TV INPUT
Switches the TV’s input source between the 
TV signal and other input sources.
Playable Discs
DVD
DVD-VIDEO
DVD-ROM
DVD-R/DVD-RW
DVD+R/DVD+RW
CD
CD-DA (Music CD)
CD-ROM
CD-R/CD-RW
VIDEO CD
Super VCD
A CD or DVD will not play if it has not been 
correctly finalized. For more information, 
refer to the operating instructions supplied 
with the recording device.
Discs that cannot be played
 Blu-ray Discs
 HD DVDs
 DVD-RAMs
 DVD Audio discs
 PHOTO CDs
 Super Audio CDs
 Data track of CD-Extras
 Audio material side on DualDiscs
 DVD-R/DVD-RW/DVD+R/DVD+RW in 
VR (Video Recording) mode
 CPRM (Content Protection for Recordable 
Media)-compatible DVD-R/RW containing 
content flagged as “Copy once.”
Notes on discs
This product is designed to playback discs 
that conform to the Compact Disc (CD) 
standard. DualDiscs and some music discs 
encoded with copyright protection 
technologies do not conform to the Compact 
Disc (CD) standard. Therefore, these discs 
may not be compatible with this product.
Note on playback operations of a DVD
Some playback operations of a DVD may be 
intentionally restricted by software producers. 
Since this system plays a DVD according to 
the disc contents the software producers 
designed, some playback features may not be 
available.
Note about double-layer DVDs
The playback picture and sound may be 
momentarily interrupted when the layers 
switch.
Region code (DVD VIDEO only)
Your system has a region code printed on the 
rear of the unit and will only play a DVD 
VIDEO (playback only) labeled with an 
identical region code or 
ALL
.
Note about Multi Session CD
You can play only the first session of a 
multisession disc.
Unpacking
Connecting your TV
Parts and Controls 
Front panel
 
SPEAKERS terminals
 
HDMI OUT jack
 
VIDEO OUT jack
 
TV/CABLE (AUDIO IN) jacks
 
FM ANTENNA jack
Rear panel
   
Playable Types of Files
Video
File format
Extensions
MPEG4 Video
1)
“.mp4,” “.m4v”
Xvid Video
2)
“.avi”
Music
File format
Extensions
MP3 (MPEG1 Audio 
Layer 3)
3)
“.mp3”
WMA
4)
“.wma”
AAC 
5)
“.m4a”
Photo
File format
Extensions
JPEG
“.jpg,” “.jpeg,” “.jpe”
1)  AVC is not compatible.
2)  Unavailable on US models.
3)  MP3PRO format is not compatible.
4)  WMA DRM,WMA Lossless or WMA 
PRO format are not compatible.
5)  AAC DRM and AAC Lossless formats are 
not supported.
 Note
 Some files may not play depending on the 
format, the encoding, or recording 
condition.
 Some USB devices may not work with this 
system.
 The system supports ISO 9660 Level 1/
Level 2, or Joliet in DATA CD.
 The system supports UDF (Universal Disk 
Format) in DATA DVD.
 The system supports FAT12, FAT16, and 
FAT32 in USB device.
 The system can recognize the following files 
or folders in DATA DVD, DATA CD and 
USB device:
up to 300 folders
up to 648 files
 It may take time to read files in the 
following cases:
there are many folders or files.
the memory capacity of the USB device 
that you are using is very large.
the memory of the USB device that you 
are using is fragmented.
©2012 Sony Corporation   Printed in China
When Installing the 
Speakers on a Wall
Caution
 Contact a screw shop or installer for 
information regarding the wall material or 
screws to be used.
 Use screws that are suitable for the wall 
material and strength. As a plaster board 
wall is especially fragile, attach the screws 
securely to a beam. Install the speakers on a 
vertical and flat wall where reinforcement is 
applied.
 Sony is not responsible for accidents or 
damage caused by improper installation, 
insufficient wall strength or improper screw 
installation, natural calamity, etc.
Prepare screws (not supplied) that are 
suitable for the hole on the back of 
each speaker. See the illustrations 
below.
5 mm 
(7/32 inch)
10 mm
(13/32 inch)
4 mm (3/16 inch)
30 mm (1 3/16 inches)
Hole on the back of the speaker
Fasten the screws to the wall, then 
hang the speaker on the wall.
7 to 9 mm
(9/32 to 3/8 inch)
Depth of fastened screw
BRAVIA Sync
ONE-TOUCH PLAY 
Activates One-Touch Play.
TV I/ (on/standby)
Turns on the TV or sets it to standby mode.
/ (on/standby) 
Turns on the system or sets it to standby 
mode.
Function selection buttons 
Select the playback source.
DVD/CD
FM
USB
TV/CABLE
FUNCTION 
Selects the functions in sequence.
REPEAT 
Activates repeat/shuffle playback mode.
SURROUND 
Selects surround audio output mode.
EQ 
Selects equalizer mode.
AUDIO 
Selects the audio format/track and FM mode.
SUBTITLE 
Selects the subtitle language when 
multilingual subtitles are available.
ANGLE 
Switches to other viewing angles when multi-
angles are recorded on a DVD VIDEO.
Number buttons 
Enter the title/chapter numbers, preset radio 
stations, etc.
PROGRAM 
Activates program play and presets radio 
stations.
SLEEP 
Sets the sleep timer.
DVD TOP MENU 
Opens the DVD’s Top Menu.
DVD MENU 
Opens or closes the DVD’s menu.
MUTING 
Turns off the sound temporarily.
/// 
Moves the highlight to a displayed item.
 (ENTER) 
Enters the selected item.
VOLUME +/– 
Adjusts the volume.
SETUP 
Opens or closes the setup menu.
 DISPLAY 
Opens or closes the Display Menu.
TIME 
Switches time information during playback.
Playback operation buttons
/ (previous/next)
/ (fast reverse/fast forward)
/ (slow) 
Activates slow reverse/slow forward when 
/ is pressed in pause mode.
 (pause)
 (play)
 (stop)
Radio operation buttons
PRESET +/–
TUNING +/–
*  Works with Sony TVs only. Depending on 
your TV, you may not be able to use some 
of the buttons.
Note
AUDIO IN 
This button does not work.
Continued 
GB
*
1
 Supplied only in certain areas. This is the 
basic connection via video cord (yellow).
*
2
 Supplied only in certain areas. Picture 
quality will be improved compared to a 
video cord.
*
3
 Sold separately. To listen to TV audio via 
the system, connect with an audio cord 
(red and white).
*
4
 If your TV does not have AUDIO OUT 
jacks, TV sound does not output via this 
system.
Connecting the FM wire antenna 
(aerial)
ANTENNA
FM
Note
 Find a location and an orientation that 
provide good reception, and then set up the 
antenna.
 Set up the antenna away from the AC power 
cord (mains lead), other cables, and metal 
objects such as windows.