Инструкция для Sony KDL-46V3000
7
(GB)
Step 3:
Installing the Base
Bracket on the wall
Installing the Base
Bracket on the wall
1
Secure the Base Bracket to the
wall using four or more 8 mm
(
wall using four or more 8 mm
(
11
/
32
inches) diameter or
equivalent screws (not supplied).
1
Determine the screw holes (d, h) for attaching the
Mounting Hook to the Base Bracket. Then attach
them securely using the supplied screws (+BVST4
× 12).
Mounting Hook to the Base Bracket. Then attach
them securely using the supplied screws (+BVST4
× 12).
d
g
h
Screw (+BVST4 × 12)
Base Bracket
Mounting Hook
2
Secure the Base Bracket and the Mounting Hook on
the wall using the four or more 8 mm (
the wall using the four or more 8 mm (
11
/
32
inches)
diameter or equivalent screws (not supplied).
Select four screw holes with the z mark shown in
the diagram below and tighten the screws securely
so that they will not become loose.
the diagram below and tighten the screws securely
so that they will not become loose.
3
Remove the screws which were attached in
procedure 1 and detach the Mounting Hook from
the Base Bracket.
procedure 1 and detach the Mounting Hook from
the Base Bracket.
CAUTION
Be careful not to drop the Mounting Hook when removing
the screws from the Mounting Hook.
the screws from the Mounting Hook.
WARNING
• The screws required for this procedure are not
supplied. Select screws suitable for the material and
structure of the wall.
structure of the wall.
• If the Base Bracket cannot be attached securely
enough, use additional screws.
• Be sure to confirm that the Base Bracket is securely
attached to the wall.
Align the unit so that it is level.
Base Bracket