Инструкция для Sony TMR-BT8IP

TMR-BT8iP [US,FR,ES] 3-279-360-32(1)

TMR-BT8iP [US,FR,ES] 3-279-360-32(1)

Press and hold the POWER button of the bluetooth receiving 

device for 7 seconds or more to standby for pairing while the 

unit is turned off.



 Passcode* of this unit is fixed at “0000”, “1234” or “8888.” Depending on the 

Bluetooth receiving device, it may be necessary to input the passcode (in this 

case, “0000”, “1234” or “8888”). This unit cannot be paired with a Bluetooth 

receiving device whose passcode is not “0000”, “1234” or “8888.”



 If the Bluetooth receiving device requires a passcode, input “0000.”

*  Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”

After about 1 second, the indicator will flash twice but keep 

pressing the power button.



 When first power on this unit after initialize, this unit will enter the “Pairing 

in process” automatically.



 The pairing information is initialized if you press and hold the power button 

for 15 seconds. The indicator lights up for 5 seconds before the initialization 

starts. Release the button immediately when the indicator lights up.

When the indicator of this unit flashes quickly, stop pressing it. 

This unit enters “Pairing in process.”

This unit’s indicator status will vary as follows, and pairing is 

established with the Bluetooth receiving device.

