Инструкция для Sony EBS-N100

 

 

 

 

 
Purpose: 
This document is a set up instruction guide for the EBS-N100 unit and using it with Display 
Commander. Known issues of this pre-release version of Display Commander are included at the end 
of the document. 
 
 
Components: 
1 - EBS-N100 
1 – AC Adapter for EBS-N100 
1 – RS232C cable 
 
 
Loading Display Commander Software 
The Display Commander software is included in an e-mail attachment.  This software extends the 
control set of the EBS-N100 from individual unit control to group controls. 
 
 
Connections 
Connecting EBS-N100 to Sony Professional Monitor 

ETHERNET

COM1

POWER

5VDC

RGB

RS232

EBS-N100

PLASMA DISPLAY

AUDIO IN

ETHERNET SWITCH/ROUTER

PORT 1

PORT 2

PORT 3

PORT 4

WAN

POWER

ADAPTOR

INTERNET

1) RS232C 

Cable 

a.  Attach the 9-pin RS232C Cable to the port  

labeled “COM1” on the EBS-N100 

b.  Attach the other end to the REMOTE input on  

the Sony Monitor 

 

 
Connecting the EBS-N100 to a Network Router 

1) CAT5 

Cable 

a.  Plug the RJ45 connector into the back of the  

EBS-N100 

b.  Plug the other end of the CAT5 cable into a  

LAN port on the router 

 

Power Up  

1)  Plug in the AC Adapter for the EBS-N100 

 
 
Configuration 
 
The EBS-N100 can be controlled and configured in two ways.  The first is using the Display 
Commander application to identify and control the EBS-N100 unit.  The second is through an 
embedded HTML Interface page for configuration and control. 
 
Display Commander 
 
Once power has been applied to the unit, double click on the Display Commander icon in the folder 
where the application was extracted to from the Zip file.  After a couple of seconds, the attached EBS-