Справочник Пользователя для D-Link DCS-960L
24
D-Link DCS-960L User Manual
Section 3 - Configuration
Motion Detection Setup Wizard
This wizard will guide you through a step-by-step process to configure the motion
detection feature of your new D-Link Camera.
Click Next to continue.
Select this box to enable the motion detection feature of your camera.
Specifies how sensitive motion detection will be from 0% to 100%. A low
sensitivity setting means that there must be large changes between two images
in order to detect motion, and a high sensitivity setting means that even small
changes will cause motion to be detected.
Low sensitivities may be useful when monitoring an area that has flickering
lights or a window to the outside in view. High sensitivities may be useful when
monitoring an area that rarely changes, such as a storeroom or warehouse.
Select Draw Motion Area to select the area of the picture to monitor for
movement to trigger recording or a snapshot. Use your mouse to click and
drag on the area that you would like to monitor for motion. Select Erase Motion
Area to clear a selected region and stop the camera from monitoring that area
of the picture.
Clears all motion detection areas from the picture.
Click Next to continue.
Enable Video
Motion:
Sensitivity:
Drawing Mode:
Clear:
Enabling the Video Motion option will allow your camera to use the motion detection
feature. You may draw areas for your camera to monitor for motion.