Использование И Уход для KitchenAid KRAV

3

To Attach Pasta Sheet Roller Attachment
(KPSA sold separately) 
Remove “Do not immerse in water” label, 

prior to use.
1.  Make sure the stand mixer’s 

speed control lever is set to the 

OFF/0 position.

2.  Unplug the stand mixer.

3.  Loosen the attachment knob (A) 

by turning it counterclockwise and remove 

the attachment hub cover or flip up hinged hub cover. 

4.  Insert the attachment shaft housing (B) into the attachment hub (C) making certain 

that attachment power shaft fits into square hub socket. 

5.  It may be necessary to rotate the Pasta Sheet Roller back and forth. When the Pasta 

Sheet Roller is in proper position, the pin (D) on the attachment housing will fit into 

the notch (E) on the hub rim. 

6.  Tighten the attachment knob by turning it clockwise until the Pasta Sheet Roller is 

completely secured to mixer.

3.  Fold dough in half and place folded 

end in first, roll 

again. Repeat 

folding in half and 

kneading process 

several times or 

until dough is smooth and elastic, and 

as wide as width of roller. Lightly dust 

pasta with flour while rolling to aid in 

drying and separation.

4.  Move the Pasta Sheet Roller adjustment 

knob to setting 2. Lightly dust the rollers 

with flour. Feed the dough through 

rollers folded end first to further flatten. 

Change to setting 3 and feed dough 

through rollers again. Dough should 

be flexible, not sticky, and as wide as 

the flat rollers.

5.  Using a knife, trim each end of the 

dough sheet.

 

1.  Prepare pasta dough and let rest at 

least 10 minutes. Cut dough into 

sections approximately the size of a 

tennis ball and work with one section 

at a time. Wrap remaining dough in 

plastic wrap to keep from drying out.

2.  Adjust Pasta Sheet 

Roller to setting 1 

(Pasta Sheet Roller 

settings are 

adjusted by 

pulling out and 

turning the knob 

on the front of the 

attachment). Turn 

the stand mixer 

to Speed 2 or 4. 

Shape dough into 

small round ball 

and slightly flatten. Feed dough into the 

Pasta Sheet Roller.