Использование И Уход для KitchenAid 36" Wall-Mount, 3-Speed Canopy Hood

Make Electrical Connection

1. Disconnect power.

2. Remove terminal box cover.

3. Remove the knockout in the terminal box cover and install 

a UL listed or CSA approved

 ¹⁄₂" strain relief.

4. Run home power supply cable through strain relief 

into terminal box.

5. Use UL listed wire connectors and connect black 

wires (C) together.

6. Use UL listed wire connectors and connect white 

wires (E) together.

7. Connect green (or bare) ground wire from home power supply 

to yellow-green ground wire (F) in terminal box using UL listed 
wire connectors.

8. Tighten strain relief screw.

9. Install terminal box cover.

10. Check that all light bulbs are secure in their sockets.

11. Reconnect power.

For optional power cord kit installations, follow the instructions 
supplied with the power cord kit. See the “Assistance or Service” 
section for information on ordering.

NOTE: Use only with range hood cord connection kits that have 
been investigated and found acceptable for use with this model 
range hood.

A

B

C

C

C

C

A

B

C

D

E

F