Руководство По Установке для KitchenAid 30-Inch 4-Element Electric Downdraft Slide-In Range

Adjust the height of top burner flames. The cooktop “low” 

burner flame should be a steady blue flame approximately ¼" 

(6 mm) high. LP gas flames have a slightly yellow tip.

The flame can be adjusted using the adjustment screw  

in the center of the valve stem. The valve stem is located  

directly underneath the control knob.

If the “Low” Flame Needs to be Adjusted:
1.   Light one burner and turn to lowest setting.
2.   Remove the control knob.
   Hold the knob stem with a pair of pliers. Use a small  

flat-blade screwdriver to turn the screw located in the center  

of the control knob stem until the flame is the proper size.  

Turning the screw clockwise will increase the flame size,  

and turning the screw counterclockwise will decrease  

the flame size.

3.  Replace the control knob.
4.   Test the flame by turning the control from the low position  

to the high position, checking the flame at each setting.

5.   Repeat the previous steps for each burner.

1.   Light burner and turn to lowest setting where both inner  

and outer burners are lit.

2.   Remove the control knob.
   Hold the knob stem with a pair of pliers. Use a small  

flat-blade screwdriver to turn the screw located in the center  

of the control knob stem until the flame is the proper size.  

Turning the screw clockwise will increase the flame size,  

and turning the screw counterclockwise will decrease  

the flame size.

3.  Replace the control knob.
4.   Test the flame by turning the control from the low position  

to the high position, checking the flame at each setting.