Использование И Уход для KitchenAid 30-Inch 4-Burner Dual Fuel Downdraft Slide-In Range

Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and 
ventilation air around the burner grate edges.

Burner Cap: Always keep the burner cap in place when using a 
surface burner. A clean burner cap will help avoid poor ignition and 
uneven flames. Always clean the burner cap after a spillover, and 
routinely remove and clean the caps according to the “General 
Cleaning” section.

Alignment: Be sure to align the gas tube opening in the burner 
base with the orifice holder on the cooktop and the igniter 
electrode with the notch in the burner base.

Gas Tube Opening: Gas must flow freely throughout the gas tube 
opening for the burner to light properly. Keep this area free of soil, 
and do not allow spills, food, cleaning agents or any other material 
to enter the gas tube opening. Keep spillovers out of the gas tube 
opening by always using a burner cap.

Burner Ports: Check burner flames occasionally for proper size 
and shape as shown in the previous illustration. A good flame is 
blue in color, not yellow. Keep this area free of soil, and do not 
allow spills, food, cleaning agents or any other material to enter the 
burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and 
the cooktop is cool. Do not use oven cleaners, bleach or rust 
removers. Do not wash in the dishwasher.

1. Remove the burner cap and the burner base and clean 

according to “General Cleaning” section.

2. Clean the gas tube opening with a damp cloth.

3. Clean clogged burner ports with a straight pin as shown. Do 

not enlarge or distort the port. Do not use a wooden toothpick. 
If the burner needs to be adjusted, contact a trained repair 
specialist.

4. Replace the burner base. See the following illustration for 

burner positions.

5. Replace the burner cap, making sure it is properly aligned with 

the burner base. The burner cap should not rock or wobble 
when properly aligned.

IMPORTANT: The bottom of the small and medium caps are 
different. Do not put the wrong size burner cap on the burner 
base.

6. Turn on the burner. If the burner does not light, check cap 

alignment. If the burner still does not light, turn off the burner. 
Do not service the burner yourself. Contact a trained repair 
specialist.

¹⁄₂

A

B

C

D

E

B

A

A

C

B

D

A

B