Справочник Пользователя для Nikon D2HS

Copying White Balance from d-0 to Presets d-1 – d-4
To  copy a measured value for white balance 
from d-0 to any of the other presets (d-1 – d-4), 
highlight the destination preset in the thumbnail 
display and press the center of the multi selector 
as described in steps 1–3 on page 61.  The menu 
shown at right will be displayed.

1

 Press the multi selector up or down to high-

light Copy d-0.

Nikon Capture 4 version 4.2.1 or later (available via download to purchasers of Nikon 
Capture 4) can be used to edit white balance when RAW photographs taken with 
the D2Hs are displayed on a computer.  The edited value can be copied directly to a 
white balance preset while the camera is connected to a computer, or the image can 
be saved to the camera memory card and the white balance value copied using the 
Select image option in the preset menu.  Any comments created with Nikon Capture 
4 will also be copied to the comment for the selected preset.  See the Nikon Capture 
4 manual for details.

2

 Press the multi selector to the right to copy 

white balance from d-0 to the selected preset 
and return to the thumbnail display.  If com-
ment has been created for d-0, the comment 
will be copied to the comment for the selected 
preset.