Справочник Пользователя для Nikon D2HS

Exposure mode determines how the camera sets shutter speed and aperture 
when adjusting exposure.  Four modes are available: programmed auto (P), 
shutter-priority auto (S), aperture-priority auto (A), and manual (M).

When using a CPU lens equipped with an aperture ring, lock the aperture ring at the 
min i mum aperture (highest f/-number).  At other settings, the shutter release will be  
dis abled and a blinking 

  will appear in the aperture displays in the top control panel 

and viewfi nder.  Type G lenses are not equipped with an aperture ring.

To  preview the effects of aperture, press and hold the 
depth-of-fi eld preview button.  The lens will be stopped 
down to the aperture value se 

lect ed by the cam 

era 

(modes P and S) or the val ue cho sen by the user (modes 
A and M), al low ing depth of fi eld to be previewed in the viewfi nder (if an optional SB-
800 or SB-600 Speedlight is attached, a modeling fl ash will be emitted).

When  On  is selected for Custom Setting b1 (ISO auto), the camera automatically 
varies sensitivity in the range 200–1600 (ISO equivalent) to help ensure optimum ex po -
sure when the limits of the camera exposure me ter ing sys tem are exceeded (exposure 
modes P, S, and A) or optimum exposure can not be achieved at the shutter-speed and 
aperture selected by the user (exposure mode M).  When sen si tiv i ty is al tered from the 
value se lect ed by the user, ISO-AUTO will fl ash in the rear control panel and a fl ashing 
ISO-A will be displayed in the viewfi nder.  In the camera photo information display for 
pictures taken at altered sensitivities, the ISO value will also be displayed in red.  Note 
that noise is more likely to ap pear in pho to graphs taken at higher sen si tiv i ties.

On can not be selected for ISO auto when sensitivity is set to HI-1 or HI-2; sim i lar ly, 
HI-1 or HI-2 can not be se lect ed when ISO auto is on.  If a fl ash is used when ISO 
auto is on, ISO will be fi xed at the value selected by the user.  If ISO auto is on when 
autoexposure bracketing is selected in exposure mode M, sensitivity will vary around 
the value selected by the user as required by the bracketing program.

Optimal exposure can be fi ne-tuned separately for each metering method (note that 
the exposure compensation icon is not displayed when exposure is fi ne-tuned).

If Off is selected for Custom Setting e4 (Modeling fl ash), the optional SB-800 and SB-
600 will not emit a modeling fl ash when the depth-of-fi eld preview button is pressed.