Справочник Пользователя для Nikon D600

148

l

Flash compensation is used to alter flash output by from –3EV to +1EV in increments 
of 

1

/

3

EV, changing the brightness of the main subject relative to the background. 

Flash output can be increased to make the main subject appear brighter, or reduced 
to prevent unwanted highlights or reflections.

Press the M (Y) button and rotate the sub-command 
dial until the desired value is displayed in the control 
panel. In general, choose positive values to make the 
main subject brighter, negative values to make it 
darker.

At values other than ±0.0, a Y icon will be displayed 
in the control panel and viewfinder after you release 
the M (Y) button. The current value for flash 
compensation can be confirmed by pressing the 
M (Y) button.

Normal flash output can be restored by setting flash 
compensation to ±0.0. Flash compensation is not 
reset when the camera is turned off.

A

Flash compensation is also available with optional SB-910, SB-900, SB-800, SB-700, SB-600, 
SB-400, and SB-R200 flash units. The SB-910, SB-900, SB-800, SB-700, and SB-600 also allow 
flash compensation to be set using the controls on the flash unit; the value selected with the 
flash unit is added to the value selected with the camera.

A

For information on choosing the size of the increments available for flash compensation, see 
Custom Setting b2 (EV steps for exposure cntrl, 0 224). For information on choosing how 
flash and exposure compensation combine, see Custom Setting e4 (Exposure comp. for 
flash, 0 240). For information on automatically varying flash level over a series of shots, see 
page 153.

M

 (Y) button

(M (Y) button pressed)