Справочник Пользователя для Nikon D600
35
s
s
Basic Photography and Playback
This section describes how to take photographs in i (auto) mode, an
automatic “point-and-shoot” mode in which the majority of settings
are controlled by the camera in response to shooting conditions, and
in which the flash will fire automatically if the subject is poorly lit. To
take photographs with the flash off while leaving the camera in
control of other settings, rotate the mode dial to j to select auto (flash off) mode.
automatic “point-and-shoot” mode in which the majority of settings
are controlled by the camera in response to shooting conditions, and
in which the flash will fire automatically if the subject is poorly lit. To
take photographs with the flash off while leaving the camera in
control of other settings, rotate the mode dial to j to select auto (flash off) mode.
Step 1: Turn the Camera On
1
Turn the camera on.
Remove the lens cap and turn the camera on. The control panel will turn on and
the display in the viewfinder will light.
the display in the viewfinder will light.
2
Check the battery level.
Check the battery level in the control panel or viewfinder.
“Point-and-Shoot” Photography
(
(
i and j Modes)
Control panel
*
Viewfinder
*
Description
L
—
Battery fully charged.
K
—
Battery partially discharged.
J
—
I
—
H
d
Low battery.
Charge battery or ready spare battery.
H
(flashes)
d
(flashes)
Shutter release disabled.
Charge or exchange battery.
* No icon displayed when camera is powered by optional EP-5B power connector and
EH-5b AC adapter. V appears in information display.
A
Image Sensor Cleaning
The camera vibrates the low-pass filter covering the image sensor to remove dust when the
camera is turned on or off (0 301).
camera is turned on or off (0 301).