Справочник Пользователя для Nikon D700

389

n

The D700 is equipped with a ten-
pin remote terminal for remote 
control and automatic 
photography. The terminal is 
provided with a cap, which protects 
the contacts when the terminal is 
not in use. The following 
accessories can be used (all lengths are approximate):

Remote Cord 

MC-22

Remote shutter release with blue, yellow, and black 
terminals for connection to a remote shutter-triggering 
device, allowing control via sound or electronic signals 
(length 1 m/3 ft. 3 in.).

Remote Cord 

MC-30

Remote shutter release; can be used to reduce camera 
shake or keep the shutter open during a time exposure 
(length 80 cm/2 ft. 7 in.).

Remote Cord 

MC-36

Remote shutter release; can be used for interval timer 
photography or to reduce camera shake or keep the 
shutter open during a time exposure. Equipped with 
back-lit control panel, shutter-release lock for use in 
bulb photography, and timer that beeps at one-second 
intervals (length 85 cm/2 ft. 9 in.).

Extension Cord 

MC-21

Can be connected to ML-3 or MC-series 20, 22, 23, 25, 
30, or 36. Only one MC-21 can be used at a time (length 
3 m/9 ft. 10 in.).

Connecting Cord 

MC-23

Connects two cameras for simultaneous operation 
(length 40 cm/1 ft. 4 in.).

Adapter Cord

MC-25

Ten-pin to two-pin adapter cord for connection to 
devices with two-pin terminals, including the MW-2 
radio control set, MT-2 intervalometer, and ML-2 
modulite control set (length 20 cm/8 in.).

GPS Unit 

GP-1 

(pg. 213)

Record latitude, longitude, altitude, and UTC time with 
pictures.

GPS Adapter Cord 

MC-35 

(pg. 214)

Connects GPS devices to D700 via PC cable supplied by 
manufacturer of GPS device (length 35 cm/1 ft. 2 in.).

Modulite Remote 

Control Set ML-3

Allows infrared remote control at ranges of up to 8 m 
(26 ft.).