Справочник для Nikon D5300

71

A

Before using the ML-L3 for the first time, remove the clear plastic battery-insulator sheet.

A

To prevent light entering via the viewfinder interfering with exposure, remove the rubber 
eyecup and cover the viewfinder with the supplied eyepiece cap (

A

If an ML-L3 remote release mode is selected and the shutter is released by any means other 
than an ML-L3 remote control (for example, the camera shutter-release button or the shutter 
button on an optional remote cord or wireless remote controller), the camera will function in 
single-frame release mode.

A

Remote control mode is cancelled automatically if no photograph is taken before the time 
selected for Custom Setting c4 (Remote on duration (ML-L3), 

0 187). Remote control 

mode will also be cancelled if the camera is turned off, a two-button reset is performed 
(

0 72), or shooting options are reset using Reset shooting menu.

A

Before taking a photograph with the flash in manual pop-up modes (

0 64), press the M (Y) 

button to raise the flash and wait for the 

M indicator to be displayed in the viewfinder (0 23). 

Shooting will be interrupted if the flash is raised after the shutter-release button on the 
ML-L3 is pressed. If the flash is required, the camera will only respond to the ML-L3 shutter-
release button once the flash has charged. In auto pop-up modes, the flash will begin 
charging when a remote control mode is selected; once the flash is charged, it will 
automatically pop up and fire when required.

A

Remote control is also available with various combinations of WR-R10, WR-T10, and WR-1 
wireless remote controllers (

0 237), when the shutter-release buttons on the wireless 

remote controllers perform the same functions as the camera shutter-release button. For 
more information, see the manual provided with the remote controllers.