Справочник Пользователя для Nikon AT-10 Transparency Adapter
8
Nikon
Transparency Unit User’s Manual
Step 6
Plug the 25-pin connector cable into the
OPTION port on the rear of your scanner.
OPTION port on the rear of your scanner.
Step 7
Firmly tighten the screws and/or clips on both
sides of the connector. This ensures that the
connector will not pull out of its port.
sides of the connector. This ensures that the
connector will not pull out of its port.
Step 8
Plug in the scanner's power cord, and turn the
scanner back on.
scanner back on.
3. Installing the AT-10