Справочник Пользователя для Nikon WT-3A (D200)
29
Network Status
The status of the link between the server and the WT-3 is shown by the status LEDs
and by the display in the top level of the wireless transmitter menu.
The status of the link between the server and the WT-3 is shown by the status LEDs
and by the display in the top level of the wireless transmitter menu.
The Status LEDs
The POWER LED lights when the WT-3 is on. Signal qual-
ity is shown by the LINK LED: the faster the LED blinks,
the better the signal and the faster data can be trans-
mitted. The BUSY LED lights while data are being sent.
The POWER LED lights when the WT-3 is on. Signal qual-
ity is shown by the LINK LED: the faster the LED blinks,
the better the signal and the faster data can be trans-
mitted. The BUSY LED lights while data are being sent.
Status
POWER
LINK
BUSY
Camera or exposure meters off , or Off selected for
Wireless transmitter > Wireless LAN system
Wireless transmitter > Wireless LAN system
(off )
(off )
(off )
Connecting to computer
(on)
(on)
(off )
Waiting for connection
(on)
(blinks)
(off )
Connected; camera control possible
(on)
(blinks)
(on)
Connection error
(blinks)
(off )
(off )
WT-3 hardware malfunction
(blinks)
(blinks)
(blinks)
The Status Display
Network status can also be viewed in the top level of the wireless transmitter
menu.
Network status can also be viewed in the top level of the wireless transmitter
menu.
Status area: The status of the
connection to the host. The
host name is displayed in
green when a connection is
established. Any errors that
prevent the camera from
connecting to the host are
also displayed here.
connection to the host. The
host name is displayed in
green when a connection is
established. Any errors that
prevent the camera from
connecting to the host are
also displayed here.
Signal strength: This icon shows fi ve levels of wireless signal
strength. It is displayed in red when no signal can be detect-
ed. For maximum signal strength, ensure a clear line of sight
between the WT-3 antenna and the wireless LAN adapter or
access point. A
strength. It is displayed in red when no signal can be detect-
ed. For maximum signal strength, ensure a clear line of sight
between the WT-3 antenna and the wireless LAN adapter or
access point. A
icon is displayed when the WT-3 is con-
nected via Ethernet.