Справочник Пользователя для Nikon FJ-CP1 (S5)

Do not use detergents or volatile chemicals such as alcohol or thinner when clean-
ing the case.  Failure to observe this precaution could result in damage to the 
product.  Use a blower or cotton swab to remove any foreign objects from the 
seal.  Be sure to remove any threads left behind by the swab.  When cleaning the 
interior of the case, use a blower or a soft, dry cloth.  Do not use water, detergents, 
or chemical agents of any kind.  Water can damage the coating on the inside of 
the lens window.

Soak the case in fresh water
Reseal the case and leave it in a basin of fresh 
water for two to three hours.  Operate each of 
the controls a few times to remove salt.  If salt 
dries on the controls, they may cease to function 
or their metal parts may rust, causing leakage.

Wipe dry
Dry the case thoroughly with a soft, dry cloth.  Do 
not use a cloth to which salt has adhered.

Let the FJ-CP1 dry in the shade
Leave the FJ-CP1 out to dry in a shady, well-ven-
tilated area.

Do not use a hair dryer or other heat source or 
place the case in direct sunlight.  Heat could 
cause deterioration, resulting in leakage.

Clean the FJ-CP1